Wind Design
Tax excluded.
*Sold as pair
Blowing in the Wind
Going a step further than the original Wind Floorstanding, the Wind Design is refined to the highest sonic tolerances. With its hand-selected drivers and exclusive crossover components, the Wind Design offers ultra-broad all-axis sound staging performance. Designed like a musical instrument, the Wind Design delivers sonic expressivity to the absolute, pulling you inside the music.
Dressed for uncompromising musical renditions, the Wind Design’s six-layer multicoated finishes results in additional structural rigidity. The deep luster finish not only adds shine but also allows for a more cohesive acoustic behavior. At the base of the front baffle is a new articulating claw that is adjustable for slanting back the baffle for precise spatial alignment. The rear skid-plate decoupling system allows for additional spatial performance.
Specs |
|
| Frequency Response | 24 Hz – 21 kHz ± 3 dB (in room) |
| Impedance | 4 Ohm |
| Sensitivity | 87 dB |
| Recommended Power | 80 – 250 W |
| Tweeter | 1″ / 2.54 cm alloy dome, flexible linear suspension, low resonance, chamber |
| Midrange | 2 × 5.5″ with 3″ / 7.62 cm voice coil, cast frame |
| Woofer | 8.5″ / 21.59 cm cast frame, specially damped |
| Placement from rear wall | 3' - 7' / 91.44 - 213.36 cm |
| Placement distance appart | 6' - 14' / 182.88 - 426.72 cm |
| Break-in time | 200-250 hours |
| Crossover Frequency | Woofer to mids, 2nd order/ 2nd order mids to tweets 2nd order 2nd order |
| Speaker terminals | Bi-wireable |
| Weight | 74.8 lb / 34 kg |
| Dimensions (W × H × D) | 10.7″ × 44.3″ × 14″ / 27.18 × 112.522 × 35.56 cm |